北京中天久业膜建筑技术有限公司
Beijing Z&T Fabric Architecture Technology Co. Ltd
Beijing Z&T Fabric Architecture Technology Co. Ltd
|
PROJECTS
General Hospital of Nanjing Military Region Membrane Structure
项 目 介 绍
Project introduction
该工程属于骨架支撑式膜结构体系，呈扇子面形状，三根支撑钢柱上分别悬挑单管梁，长度不一，前高后低，高低起伏，悬挑长度最大为8.65米，前端标高8.785米，钢柱柱头拉设稳定索和下拉索。相邻钢柱间距均为3.5米，中间柱高11.3米，两侧柱高10.0米，膜材覆盖于钢结构杆件表面，以杆件为界，分为6个膜单元。
General Hospital of Nanjing Military Region Membrane Structure
This project belongs to the framework membrane structure. It is composed by 3 fan-shaped membrane units. The maximum cantilever length is 8.65m, and the front elevation is 8.785m. Stable cables and pulling-down cables are fixed on the top of the steel columns. Adjacent steel column spacing is 3.5m. The tallest column at the middle is 11.3m, and the two side columns are 10m high. The whole surface is divided into 6 membrane units.
竣工时间：2009年5月 Completion time: May. 2009
建设地点：南京 Construction site: Nanjing
结构形式：张拉式 Structure form: Tension structure
膜 面 积：242平米 Membrane area: 242 square meters
膜材型号：杜肯B18089 PTFE膜材 Membrane material: Duraskin B18089 PTFE